Product Info
Description
SCR HIGH VOLTAGE CARD
Repair
ICC’s large inventory investment includes DS200SHVMG1A. ICC’s highly skilled technicians have the training and expertise to repair DS200SHVMG1A. In addition, our DS200SHVMG1A repairs come with a warranty. Please fill out our Request a Quote form with DS200SHVMG1A in the Subject Line, and/or include DS200SHVMG1A in the Message, for additional information about ICC’s DS200SHVMG1A. A ICC Business Development Leader will assist you with your DS200SHVMG1A needs shortly!
Reman
Purchasing a remanufactured GE DS200SHVMG1A offers substantial savings over new/unused with the functionality and reliability to match. Our assurance in remanufactured products allows ICC to offer 24 Months Warranty.
Exchange
Exchange is the combination of quick supply with applied discount against your old faulty card. Send us your old GE DS200SHVMG1A and we will replace (exchange) with a remanufactured spare, supplied with 24 Months Warranty
DS200SHVMG1A is an SCR High Voltage M-Frame Interface Board manufactured by General Electric under EX2000. The SCR High Voltage M-Frame Interface Board (SHVM) interfaces signals from the SCR bridge of an M-frame drive to the DCFB or SDCI Power Supply Board and PCCA Power Connect Card.
Functional Description
The SHVM board performs the following functions.
Converts shunt signals (-500 mV to + 500 mV) into differential frequency outputs (0 - 500 kHz) that are sent to the DCFB or SDCI board.
Incorporates hardware jumper selectable 10:1 current transformers to provide additional current attenuation capability.
Provides attenuation of ac line, motor armature, and SCR bridge voltages
The SHVM board includes configurable jumpers, wiring plug connectors, and stab connectors parts of the board.
DC Bridge Shunt Isolator Circuit
Shunt signals from the bridge are converted by the dc positive (+) and dc negative () floating shunt isolator voltage controlled oscillator (VCO) circuits. The circuits are fed to the DCFB board and range from 500 mV to +500 mV (0 to 500 kHz). The input circuits of the isolators float to the bridge potentials of the dc+ and dc voltages.
AC Current Transformers
If required, the SHVM board provides 10:1 current transformer (CT) attenuation for alternating current line currents (phase A and phase C). This attenuation is switchable. Because the CT burden resistors on the SDCI and DCFB Power Supply Boards are not rated to handle more than 144 mA main line ACCT secondary current (rated dc current/ACCT ratio), attenuation is required above 144 mA. When the main line ACCT secondary current is less than 144 mA, attenuation should be turned off.
Application Data
The SHVM board is a high voltage interface board with floating board hardware at feedback voltage potential. Even when the control power is turned off, a high voltage could be applied to the board. Before making any hardware changes or changing the board, ensure that all high voltage input is also deenergized.
Board Hardware
The SHVM board has configurable jumpers, wiring plug connectors, and stab connectors (but no LEDs, fuses, testpoints, or switches).
Configurable Jumpers
The SHVM board has configurable jumpers, wiring plug connectors, and stab connectors (but no LEDs, fuses, testpoints, or switches).
Board Connectors
The SHVM board communicates with the drive's other boards and devices via eight plug connectors (designated PL) and eighteen stab connectors.
